Need a little help keeping your fabric layers together? FuseWeb & FuseWeb Paper Release makes it easier to bring your fabric pieces together as you sew.

Whether you’re working on appliqué, quilting, or creative fabric crafts, fusible web is a handy sewing essential that helps hold fabric layers together while you sew. Camelot Fabrics’ Behind the Seams line includes two options: regular FuseWeb and FuseWeb Paper Release.

Both are double-sided fusible interfacings designed to bond two fabrics together, but they offer slightly different ways to work. Let’s take a closer look at what they do, how to use them, and when to choose one over the other.

What is FuseWeb?

Think of FuseWeb as a lightweight adhesive layer that helps bring two pieces of fabric together using heat. Rather than adding padding or structure like a foam stabilizer, fusible web helps hold fabric layers in place while you work.

It’s especially useful for projects where you want fabrics to stay together during construction, whether you’re creating appliqué designs, working on decorative details, or bringing different fabric pieces together for a craft project.

Camelot’s regular FuseWeb is a lightweight, double-sided fusible interfacing made from 100% nylon, with a weight of 25gsm. It’s designed for bonding two fabrics and is great for seams, appliqué, and crafting.

Unlike a permanent fabric adhesive, FuseWeb is intended to act as a sewing aid, helping hold fabric layers together during construction. The bond is not meant to be permanent, so stitching is still an important part of finishing your project.

The key thing to remember? FuseWeb helps make sewing and assembling your project easier, but it isn’t a substitute for stitching.

When should you use FuseWeb?

FuseWeb is ideal for projects where you want to hold fabric layers together using heat. It can be especially helpful when working with appliqué or decorative fabric details that need to stay in place while you sew.

Here are a few ways to use it:

• Appliqué: Help hold fabric shapes in place when creating decorative designs.
• Seams: Help bring fabric layers together during construction.
• Quilting: Bond fabric pieces or details as part of your project.
• Fabric crafts: Bring layers together for creative projects and handmade details.
• Decorative sewing: Help secure fabric elements before adding stitching or other finishing touches.

Whether you’re adding a small fabric detail or working on a larger creative project, FuseWeb can help make assembling your fabric layers easier.

FuseWeb vs. FuseWeb Paper Release

So, when should you choose regular FuseWeb instead of FuseWeb Paper Release?

Both products are double-sided fusible interfacings designed to bond two fabrics together. The main differences are their material composition, weight, and the paper release layer included with one option.

Regular FuseWeb

• Material: 100% nylon
• Weight: 25gsm
• Width: 20 inches
• Length: 40 yards per bolt

Regular FuseWeb is a lightweight option for bonding fabrics and is great for seams, appliqué, and crafting.

FuseWeb Paper Release

• Material: 100% polyamide
• Weight: 30gsm
• Width: 15 inches
• Length: 35 yards per bolt

FuseWeb Paper Release offers the same double-sided fusible application, with the addition of a paper release layer. This provides a paper-backed option for projects where having a release layer is helpful during application.

Both products are designed to help hold fabric layers together as you work, so the choice comes down to the format you prefer and the needs of your project.

How to use fusible FuseWeb

Adding FuseWeb to your project is simple with a little preparation. Since it’s activated with heat, it’s important to work carefully and follow the recommended application instructions.

Step 1: Prepare your fabric

Start with clean, dry fabric and cut your pieces to the size you need.

For best results, cut the interfacing approximately ¼ inch smaller than your fabric. This helps prevent adhesive resin from reaching the face of your fabric.

Step 2: Position the FuseWeb

Place the FuseWeb between the two fabric layers you want to bond.

For FuseWeb Paper Release, use the paper release layer to help manage the interfacing during application, following the product’s instructions.

Step 3: Apply heat

Using a medium to high iron setting, apply approximately 10 seconds of steam intermittently. Use a pressing cloth on the back side of the fabric being fused for optimal results.

Always test a small scrap of fabric first to make sure the heat and adhesive are suitable for your material.

Step 4: Let it cool

Allow the fabric to cool completely before moving on to the next step of your project. This gives you a chance to check that the layers are held together and ready for stitching.

Remember, FuseWeb is a sewing aid rather than a permanent adhesive, so stitch your project as needed to secure the pieces.

Avoid these common fusible web mistakes

Fusible web is a handy sewing essential, but a few small things can make a big difference in your results.

Cutting the interfacing too large

Always cut your interfacing approximately ¼ inch smaller than your fabric. This helps prevent adhesive resin from contaminating the face of your fabric.

Skipping the pressing cloth

A pressing cloth helps protect your fabric during application. Place it on the back side of the fabric being fused for optimal results.

Using too much heat or pressing for too long

Different fabrics respond differently to heat. Follow the recommended application instructions and test a small scrap first to help avoid damaging your fabric.

Forgetting to test your fabric

Before applying FuseWeb to your finished project, test it on a small scrap. This is especially helpful when working with delicate fabrics or materials that may be sensitive to heat.

Relying on FuseWeb as a permanent bond

FuseWeb is designed to help hold fabric layers together as you work, not to create a permanent bond on its own. Be sure to stitch your project as needed to secure the pieces and achieve a finished result that lasts.

Why sewists love FuseWeb:

FuseWeb is a useful addition to any sewing room because it opens up more ways to work with fabric. From appliqué and decorative details to seams and creative crafts, it helps bring fabric layers together while you sew.

Its lightweight construction makes it a practical option when you want to hold fabrics in place without adding the bulk of a padded stabilizer.

And with both regular FuseWeb and FuseWeb Paper Release available, you can choose the option that best suits your project and preferred application method.

Both versions are also machine washable up to 40°C / 104°F and can be tumble dried on low, making them practical additions to a variety of sewing projects. Always follow the care instructions for your finished item and fabric.

Whether you’re adding decorative fabric shapes, experimenting with appliqué, or working on your next handmade craft, FuseWeb can help make the process a little easier.

Ready to bring your fabric pieces together?

From fusible web and interfacings to foam stabilizers, fleece, and other sewing essentials, Behind the Seams has the tools to help bring your creative ideas to life.

Want to learn more? Watch our YouTube video for a closer look at how this product works!

Explore the collection and find the right essentials for your next sewing project.

Shop Behind the Seams